Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

VoltLogic
New member
Posts: 7
Joined: Wed Oct 14, 2026 9:18 pm

Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

Post by VoltLogic »

I’ve got a secondary rig that I’m trying to keep alive without throwing much money at it: Ryzen 5 3600, B450 board, 16GB DDR4-3200, and I recently dropped in an Arc A750. The card was cheap enough that I figured it was worth a shot, but I’m running into the usual older-platform caveats.

The slot is PCIe 3.0 x16, which I know is not the end of the world for this class of card. The bigger question is ReBAR. The board is on a fairly recent BIOS and it does expose Above 4G Decoding, but I haven’t been able to get Resizable BAR enabled yet. CSM is off, boot is UEFI, and I’ve tried the usual settings. In a couple of DX12 titles it feels fine, but in others I get these little hitches that I don’t remember seeing on my main machine.

I know Arc is unusually sensitive to ReBAR, but I’m trying to separate “this card needs ReBAR or it’s pointless” from “you lose a bit of performance and some frame pacing.” Has anyone actually run an A750 or A770 on PCIe 3.0 with ReBAR disabled for a while? I’m looking for real experiences, not just benchmark bars. Specifically: did you see stutter increase, average fps drop, or both? And did a BIOS update ever make the ReBAR option appear on a B450 board that didn’t show it before?

I’d rather not buy a newer board just to make a budget card behave. If the answer is “sell it and get something less picky,” I can live with that, but I want to know what I’m giving up first.

Top

RetroHertz
New member
Posts: 3
Joined: Thu Oct 29, 2026 6:18 am

Re: Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

Post by RetroHertz »

Short answer: ReBAR is basically free performance on Arc, and without it some games fall off a cliff in frame pacing. I wouldn’t run an A750 long-term on a board that can’t do Above 4G Decoding plus ReBAR. It’s not that PCIe 3.0 x16 is a disaster — it isn’t — but Arc’s driver does a lot of behind-the-scenes work that assumes ReBAR is there.

My old B450 needed a BIOS update before the ReBAR toggle showed up. Before that, I could enable Above 4G but the actual Resizable BAR setting was missing. Check your board vendor’s latest BIOS notes. If it’s still not there, I’d lean toward a different card for that rig.

Top

LilSolder
New member
Posts: 2
Joined: Thu Oct 15, 2026 7:18 pm

Re: Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

Post by LilSolder »

Wait, what is ReBAR exactly? I see “Resizable BAR” in BIOS and sometimes in GPU software, but I always leave it alone because I don’t want to break anything. Is it the same as AMD Smart Access Memory? I’m on an older GPU so maybe it doesn’t even apply to me, but I’m curious because I might upgrade to an Arc card later.

Top

SiliconMoss
New member
Posts: 6
Joined: Wed Sep 09, 2026 6:18 am

Re: Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

Post by SiliconMoss »

ReBAR is absolutely not optional on Arc! It’s the difference between smooth frame pacing and a stutter-fest in some DX12 titles. PCIe 3.0 x16 is fine — the A750 doesn’t saturate 4.0 in most games — but ReBAR off is the real kneecap. Have you checked whether your board hides the setting under “PCI Subsystem Settings” or only shows it after you disable CSM and set boot to UEFI-only? Some B450 boards are weird like that. Also make sure Above 4G Decoding is on first, because ReBAR won’t show without it.

Top

dustfilter
New member
Posts: 9
Joined: Wed Oct 14, 2026 5:18 am

Re: Arc A750 on PCIe 3.0 with ReBAR off — how much performance am I actually losing?

Post by dustfilter »

Yeah, I’d sort the BIOS before blaming the card. CSM off, Above 4G on, ReBAR on. On older boards the setting sometimes only appears after a BIOS update, and occasionally it’s called “Re-Size BAR Support” instead of Resizable BAR. If you’ve done all that and it’s still missing, that board may just not have it enabled in firmware. In that case I’d either swap the card or swap the board — but don’t spend a fortune chasing it.

Top